Home station  
Set as homepage Add to favorites    中文版 繁体 English
 
Testing to: Rolling Fire testing | Building Fire testing | Marine material | Aircraft material | Fire Resistance | Jet Fire | Other
   
User name:
Password:
Code:
   
Fire standard
RailwayMarineBusBuilding
Test method More>>
BS 476-6:1989+A1:2009 fire...
BS 476-7:1997 Classificati...
BS 476-20:1987 fire resist...
BS ISO 4589-2:2006-06
NF P 92-501: M classificat...
NF P 92-503: M classificat...
NF P 92-504: Speed of spre...
ASTM E 662: Smoke density ...
ASTM E 648 Flooring test
ASTM E 162: surface flamma...
 
Home   Marine material   IMO FTPC Part 5: Test for surface flammability
 

IMO FTPC Part 5: Test for surface flammability

IMO FTPC Part 5: Test for surface flammability

 

Field of application

Surface materials for bulkheads and ceilings and similar exposed surfaces, floor coverings

Bulkhead, wall and ceiling linings

Floor coverings

CFE     Qsb     Qt      Qp

Kw/m2    MJ/m2     MJ      kW

CFE     Qsb     Qt      Qp

Kw/m2    MJ/m2     MJ      kW

≥20     ≥1.5     ≤0.7     ≤4.0

≥7.0     ≥0.25    ≤2.0    ≤10.0

Where CFE: Critical flux at extinguishment

       Qsb: Heat for sustained burning  

       Qt: Total heat release

       Qp: Peak heat release rate

 

The test is terminated when any one of the following is applicable;

1.      The specimen fails to ignite after a 10 minute exposure

2.      Three minutes have pass since all flaming from the specimen ceased.

3.      Flaming reaches the end of the specimen or self extinguishes and thus ceases to progress along the specimen. This criterion is only used when heat release measurements are not being made.

4.      In the case of floorcoverings, the test shall be terminated after 40 minutes.

 

IMO MSC 61(67) FTPC – Test list

IMO FTPC Part 1: Non-combustibility test

IMO FTPC Part 2: Smoke and toxicity test

IMO FTPC Part 4: Test for fire door control systems

IMO FTPC Part 5: Test for surface flammability

IMO FTPC Part 6: Test for primary deck coverings

IMO FTPC Part 7: Test for vertically supported textiles and films

IMO FTPC Part 8: Test for upholstered furniture.

IMO FTPC Part 9: Test for bedding components

ISO 9705 and ISO 5660: Test for fire-restricting materials for high-speed craft

 

Tel: (+86) 025-86583475


 Source:防火网  Addtime:7/29/2010 Hits:4404

 Previous: IMO FTPC Part 6: Test for primary deck coverings

 Next: IMO FTPC Part 2: Smoke and toxicity test
 
 
Home | Fire Test & Certification | Standard | News | Product | Exhibition | Flame retardant | On-line consultation | Contact us
Copyright © 2008-2024 Firete.com All Right Reserved
TEL:(+86)-25-8658 3475