巴黎RATP公司（Regie Autonome dea Transports Parisiens）,巴黎地铁现由巴黎大众运输公司（RATP）负责营运。在八十年代，RATP和SNCF制定法国标准：NF F16-101和NFF16-102，这份在1998年版本出具的NFF16-101法国轨道车辆的标准一直引用至今。两个法国公司对上述标准描述中塑料燃烧性能方面的许多发展做出了积极的贡献。咨询电话：025-8658 3475。
RATP实验室为法国COFRAC法国认可委员会认可的实验室。RATP具有法国和国际多种资质。许多厂商都十分信任RATP出具的测试报告及证书。中国防火网携手RATP实验室为广大客户提供法国COFRAC资质NFF16-101测试报告及证书，咨询电话：400-666-7290。
...ASTM C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C612 隔热的矿物纤维块材和板材标准规范
This specification covers mineral fiber block and board thermal insulation. Mineral fiber board insulation covered by this specification shall be classified into types and categories; category 1 - no compressive resistance properties are required, category 2 - minimum compressive resistance properties are required, type V, grade A - requires no heat-up schedule, type V, grade B - heat-up schedule is required. Mineral fiber block and semi-rigid and rigid board insulation shall be composed of rock, slag, or glass processed from the molten state into fibrous form and bonded with organic or inorganic binders or both. A detectable odor of objectionable nature recorded by more than two of five panel members shall constitute rejection. When tested and evaluated, the corrosion resulting from insulation in contact with steel plates shall be judged to be no greater than for comparative plates in contact with sterile cotton. When tested and evaluated at its delivered thickness, all mineral fiber (rock, slag, and glass) board and block must qualify to be semi-rigid or rigid. When tested, the board and block insulation shall not warp, flame, or glow during hot surface exposure. When tested, the midpoint temperature shall not at any time exceed the hot surface temperature by more than 200°F (111°C). Determine the thermal conductivity as a function of temperature for the representative specimens with data obtained from a series of thermal tests. The compressive resistance, linear shrinkage, water vapour sorption, odor emission, and rigidity or semi-rigidity shall be tested to meet the requirements prescribed.
...
ASTM C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM C553 商用和工业用矿物纤维毡隔热的标准规范
This specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at certain temperatures. The orientation of the fibers within the blanket is primarily parallel to the principal surface (face). The mineral fiber blanket insulation shall be classified into seven types: Types I, II, III, IV, V, VI, and VII. The classification is based upon the insulations' maximum use temperature and apparent thermal conductivity. Mineral fiber blanket insulation shall be composed of rock, slag, or glass processed from the molten state into fibrous form bonded with an organic or inorganic binder, or both. Asbestos shall not be used as an ingredient or component part of the product. Different test methods shall be performed on the insulation to determine the following properties: odor emission, corrosiveness to steel, non-fibrous content, maximum use temperature, maximum exothermic temperature rise, apparent thermal conductivity, water vapor sorption, flexibility, rigidity, and surface burning characteristics.
...我司南京睿督公司专业从事动车组、高铁、地铁等轨道车辆材料的防火阻燃、烟雾毒性检测上十年，防火烟毒测试方面拥有丰富经验，南京睿督公司咨询电话：025-8658 3475。
TL/CL 311-2013 动车组避雷器（暂行）
TL/CL 312-2013 动车组充电机（暂行）
TL/CL 313-2013 动车组电线电缆（暂行）
TL/CL 314-2013 动车组电阻制动装置（暂行）
TL/CL 315-2013 动车组辅助变流器（暂行）
...
我司南京睿督公司专业从事动车组、高铁、地铁等轨道车辆材料的防火阻燃、烟雾毒性检测上十年，防火烟毒测试方面拥有丰富经验，南京睿督公司咨询电话：025-8658 3475。
TL/CL 291-2013 动车组餐车上货门（暂行）
TL/CL 292-2013 动车组车钩及缓冲装置（暂行）
TL/CL 293-2013 动车组车体（暂行）
TL/CL 294-2013 动车组空调废排装置（暂行）
TL/CL 295-2013 动车组空调换气装置（暂行）
...
CAN/ULC-S706 建筑木质纤维隔热标准(ULC 706)
CAN/ULC-S706 Standard for wood fibre thermal insulation for buildings.Standard by Underwriters Laboratories of Canada.
我们还提供各种加拿大防火阻燃测试
加拿大CAN/ULC S102/135认证 http://www.firete.com/popular_standards/7922.html
...
ASTM C523-1968(1987) Standard test method for light reflectance of acoustical materials by the integreting sphere reflectometer
ASTM C523-1968(1987) 对声学材料由积分球反射撤回的光反射率的测试方法。
ASTM 903反射率测试 http://www.fire-test.com/teststandard/usa/7146.html
...
甲醛，对于大家来说是个很熟悉的致癌装修污染气体。在装修过程中，很多物品都会释放出甲醛来。地板也是甲醛的释放源之一，在进行家居甲醛检查的时候，地板甲醛检测应该要如何进行呢?南京睿督公司咨询电话：025-8658 3475。
地板甲醛检测四大方法
1、分光光度检测法
这种方法是从分子结构出发，根据不同结构的分子对电磁辐射的吸收性而建立的一种定性、定量缝隙方法，是当前较主要的三种甲醛污染问题的常规检测方法。现代分光光度法主要有乙酰丙酮法、酚试剂法、AHMT法、品红一亚硫酸、变色酸法、间苯三酚法、催化光度法等每种方法都有其侧重点，各有优劣性。
...
我司南京睿督公司专业从事动车组、高铁、地铁等轨道车辆材料的防火阻燃、烟雾毒性检测上十年，防火烟毒测试方面拥有丰富经验，南京睿督公司咨询电话：025-8658 3475。
TL/CL 275-2013 动车组车轮（暂行）
TL/CL 276-2013 动车组车轴（暂行）
TL/CL 277-2013 动车组齿轮箱组成（暂行）
TL/CL 277-2013 动车组齿轮箱组成（暂行）
TL/CL 277-2013 动车组齿轮箱组成（暂行）
...
BS EN 14179-1 Glass in building-Heat-soaked thermally toughened soda lime silicate safety glass-Part 1: Definition and description
BS EN 14179-1 建筑物玻璃-长时间热处理的热钢化钙钠硅酸盐安全玻璃-第1部分：定义和描述
BS EN 14179-1标准适用范围
This BS EN 14179-1 standard specifies the heat soak process system together with tolerances flatness, edgework, fragmention and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings.
