DIN5510-2标准是铁路车辆防止燃烧－第2部分：材料和构件的燃烧特性和燃烧并发现象，分类，要求和测试方法。DIN5510标准要求动车组、高铁、地铁等轨道车辆采用防火阻燃、低烟低毒性能的材料，以减少或者避免火灾的发生及扩大。由于地铁车辆材料最终用途不同，其DIN5510测试方法也完全不同。我司南京睿督与您分享一般材料及地面材料DIN5510测试项目及标准。咨询电话：025-8658 3475。
一般材料DIN5510-2测试项目、标准及要求
1. 阻燃防火等级分类： S2-S5（S2/S3/S4/S5），根据DIN54837标准进行测试。
...
ASTM D2485-91(2013) Standard Test Methods for Evaluating Coatings For High Temperature Service
ASTM D2485-91(2013) 评定高温设备用覆层的试验方法
1. ASTM D2485-91(2013)标准适用范围：
1.1 These test methods cover the evaluation of the heat-resistant properties of coatings designed to protect steel surfaces exposed to elevated temperatures during their service life. Two test methods are described as follows:
...ASTM C871-2011 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride,Fluoride,Silicate,and Sodium Ions
ASTM C871-2011 可滤去氯化物、氟化物、硅酸盐及钠离子的绝热材料化学分析的试验方法。
ASTM C871-2011标准适用范围：
1.1 These test methods cover laboratory procedures for the determination of water-leachable chloride, fluoride, silicate, and sodium ions in thermal insulation materials in the parts per million range.
ASTM C795-2008(2013) 与奥氏体不锈钢接触用绝热材料的规格
ASTM C795-2008(2013) Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C795-2008(2013)标准适用范围：
1.1 This specification covers non-metallic thermal insulation for use in contact with austenitic stainless steel piping and equipment. In addition to meeting the requirements specified in their individual material specifications, issued under the jurisdiction of ASTM Committee C16, these insulations must pass the preproduction test requirements of Test Method ASTM C692, for stress corrosion effects on austenitic stainless steel, and the confirming quality control, chemical requirements, when tested in accordance with the Test Methods ASTM C871.
