防火阻燃测试--中国防火网 400－603－6575

ASTM C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
ASTM C665 轻质框架建筑和工厂预制住宅用矿纤维铺面隔热材料规格

1. ASTM C665标准适用范围

1.1 This specification covers the composition and physical properties of mineral-fiber blanket insulation used to thermally or acoustically insulate ceilings, floors, and walls in light frame construction and manufactured housing. The requirements cover fibrous blankets and facings. Values for water-vapor permeance of facings are suggested for information that will be helpful to designers and installers.

ASTM C653-1997(2012) Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
ASTM C653-1997(2012) 低密度毡型矿物纤维隔热材料热阻测定标准指南

1. ASTM C167标准适用范围

1.1 This guide describes the calculation and interpolation of a thermal resistance value for low-density blanket-type insulation material at a particular density and thickness having been selected as representative of the product. It requires measured values of this average density and thickness, as well as apparent thermal conductivity values determined by either Test Method C177 or C518.

南京睿督公司携手欧盟公告号实验室提供Notified Body欧盟公告机构所出具的阻燃壁纸检测报告。所在在欧盟市场上生产、销售、流通的壁纸的防火阻燃等级必须至少达到EN13501-1中的E级。防火阻燃E级是建材防火的最基本等级。南京睿督公司与大家分享EN13501-1标准E级规定及测试内容，咨询电话：025-8658 3475。

壁纸EN13501-1防火阻燃E级测试标准及数据要求：
EN13501-1防火等级：根据EN ISO 11925-2标准进行测试并且同时符合要求。
...

现在机车材料的有害物质限量是否达到可控的范围内越来越受关注。铁标TB/T 3139-2006是机车车辆内装材料及室内空气有害物质限量标准，南京睿督公司提供铁标TB/T3139-2006测试2015年最新报价。咨询电话：025-8658 3475。

铁标TB/T3139标准名称及测试项目：
TB/T3139-2006 机车车辆内装材料及室内空气有害物质限量(中华人民共和国铁道行业标准)
TB/T3139-2006 Decorating materials and indoor air limit of harmful substance for railway locomotive and vehicle.

GB/T 8174标准名称及简介
GB/T 8174-2008 Method of measuring and evaluation thermal insulation effects for equipments and pipes.
GB/T 8174-2008设备及管道绝热效果的测试与评价。

GB/T 8174-2008标准根据GB/T8174-1987《设备及管道保温效果的测试与评价》和GB/T16617-1996《设备及管道保冷效果的测试与评价》的内容整理、修订而成。GB/T 8174-2008标准同时代替GB/T8174-1987和GB/T16617-1996。南京睿督咨询电话：025-8658 3475。

中文名 美国水行业协会                     缩    写 AWWA
外文名 American Water Works Association   时    间 1881年

American Water Works Association(AWWA)，即美国水行业协会，成立于1881年，是安全用水方面的权威机构。
...

欧盟建筑产品的防火阻燃等级被划分为七个等级：A1、A2、B、C、D、E、F。所在在欧盟市场上生产、销售、流通的建筑产品及材料的防火等级必须至少达到EN13501-1中的E级。防火等级E级是建材防火的最基本等级。南京睿督公司与大家分享EN13501-1标准E级规定及测试内容，咨询电话：025-8658 3475。

EN13501-1防火等级E级测试标准及数据要求：
EN13501-1防火等级：根据EN ISO 11925-2标准进行测试并且同时符合要求。
...

巴黎RATP公司（Regie Autonome dea Transports Parisiens）,巴黎地铁现由巴黎大众运输公司（RATP）负责营运。在八十年代，RATP和SNCF制定法国标准：NF F16-101和NFF16-102，这份在1998年版本出具的NFF16-101法国轨道车辆的标准一直引用至今。两个法国公司对上述标准描述中塑料燃烧性能方面的许多发展做出了积极的贡献。咨询电话：025-8658 3475。

RATP实验室为法国COFRAC法国认可委员会认可的实验室。RATP具有法国和国际多种资质。许多厂商都十分信任RATP出具的测试报告及证书。中国防火网携手RATP实验室为广大客户提供法国COFRAC资质NFF16-101测试报告及证书，咨询电话：400-666-7290。

ASTM C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C612 隔热的矿物纤维块材和板材标准规范

This specification covers mineral fiber block and board thermal insulation. Mineral fiber board insulation covered by this specification shall be classified into types and categories; category 1 - no compressive resistance properties are required, category 2 - minimum compressive resistance properties are required, type V, grade A - requires no heat-up schedule, type V, grade B - heat-up schedule is required. Mineral fiber block and semi-rigid and rigid board insulation shall be composed of rock, slag, or glass processed from the molten state into fibrous form and bonded with organic or inorganic binders or both. A detectable odor of objectionable nature recorded by more than two of five panel members shall constitute rejection. When tested and evaluated, the corrosion resulting from insulation in contact with steel plates shall be judged to be no greater than for comparative plates in contact with sterile cotton. When tested and evaluated at its delivered thickness, all mineral fiber (rock, slag, and glass) board and block must qualify to be semi-rigid or rigid. When tested, the board and block insulation shall not warp, flame, or glow during hot surface exposure. When tested, the midpoint temperature shall not at any time exceed the hot surface temperature by more than 200°F (111°C). Determine the thermal conductivity as a function of temperature for the representative specimens with data obtained from a series of thermal tests. The compressive resistance, linear shrinkage, water vapour sorption, odor emission, and rigidity or semi-rigidity shall be tested to meet the requirements prescribed.
...

ASTM C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM C553 商用和工业用矿物纤维毡隔热的标准规范

This specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at certain temperatures. The orientation of the fibers within the blanket is primarily parallel to the principal surface (face). The mineral fiber blanket insulation shall be classified into seven types: Types I, II, III, IV, V, VI, and VII. The classification is based upon the insulations' maximum use temperature and apparent thermal conductivity. Mineral fiber blanket insulation shall be composed of rock, slag, or glass processed from the molten state into fibrous form bonded with an organic or inorganic binder, or both. Asbestos shall not be used as an ingredient or component part of the product. Different test methods shall be performed on the insulation to determine the following properties: odor emission, corrosiveness to steel, non-fibrous content, maximum use temperature, maximum exothermic temperature rise, apparent thermal conductivity, water vapor sorption, flexibility, rigidity, and surface burning characteristics.