防火阻燃测试--中国防火网 400-603-6575

中国防火网专注于英国防火测试BS6853,法国防火测试NFF16-101,德国防火测试DIN5510-2,美国防火测试NFPA130,欧标EN45545等防火阻燃测试

NFC32-070电缆测试_NFC32-070 C1/C2等级测试

NFC32-070标准名称
NFC32-070:Insulated conductors and cables for installation-Classification tests on conductors and cables with regard to fire behaviour.
NFC32-070:用于安装的绝缘导体和电缆-依据燃烧特点有关导体和电缆分类试验。

NFC32-070测试方法
将电线电缆垂直暴露在温度大约在830℃的热源下,测试时间为30分钟,根据整个电线电缆的燃烧破坏长度来评估电线电缆是否达到NF C32-070 C2或NF C32-070 C1。

...

BS6387电缆完整性测试

BS6387 Specification for performance requirements for cables required to maintain circuit integrity under fire conditions.
BS6387 在火灾情况下保持电路完好的电缆性能要求规范。

BS6387电缆完整性测试/耐火测试包括
BS6387 Se-11.1仅耐火测试
BS6387 Se-11.2耐水火测试
BS6387 Se-11.3耐机械冲击与火测试

...

UL1685成束电缆测试_电缆成束燃烧测试UL 1685

UL 1685:1992-Vertical-Tray Fire-Propagation and smoke release test for electrical and optical fiber cable
UL 1685:1992-电缆和光缆垂直燃烧的火焰传播及烟释放量测试。

UL1685电缆成束燃烧测试标准要求
根据电缆的燃烧破坏长度来评定,破坏长度不超过2.44m。

UL1685电缆成束燃烧测试类似标准
UL1685 Vertical tray,UL2556 Section 9.6 Method 1(UL method)

...

UL1685-FT4成束电缆测试_电缆成束燃烧测试UL 1685

UL 1685:1992-Vertical-Tray Fire-Propagation and smoke release test for electrical and optical fiber cable
UL 1685:1992-电缆和光缆垂直燃烧的火焰传播及烟释放量测试。

UL1685-FT4电缆成束燃烧测试标准要求
根据电缆的燃烧破坏长度来评定,破坏长度不超过1.5m。

UL1685-FT4电缆成束燃烧测试类似标准
...

IEC60332-3电缆成束燃烧测试_IEC 60332-3-24/25多根成束电缆燃烧测试

IEC60332-3-24 Test on electric and optical fibre cables under fire conditions-Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables-Category C.
IEC60332-3-24着火条件下电缆的通用试验方法--多根成束垂直火焰燃烧--第2-4部分--小型电缆--类型C

IEC60332-3-25 Test on electric and optical fibre cables under fire conditions-Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables-Category D.
...

VG 95218-2方法3电缆单根燃烧测试_单根电缆VG 95218-2测试

IEC 60332-1-2 Tests on electric and optical fiber cables under fire conditions—Part 1-2: Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 KW pre-mixed flame
IEC 60332-1-2着火条件下电缆和光缆的测试,单根绝缘电线电缆的垂直,蔓延测试,1kw预混火焰法。测试程序按照IEC60332-1-1进行。

...

UL2556 Section 9.3(FT1)电缆单根燃烧测试_ UL2556单根电缆防火测试

UL2556 Section 9.3(FT1) Wire and Cable test methods, Section 9.3-determining the resistance of a wire, cable, or the vertical propagation of flame.
UL2556 Section 9.3(FT1)电线电缆测试方法,第9.3部分-电缆垂直燃烧测试方法。

UL2556 Section 9.3(FT1)测试方法
测试样品为(600±25)mm的电线电缆。

...

UL 1581 Section 1090(H)电缆燃烧测试

UL1581 Reference standard for electrical wires, cables and flexible cords. 
UL1581电线电缆及软线的参考标准。

UL1581电缆单根燃烧测试类似标准:
UL 2556 Section 9.1(FT2)

更多动车地铁高铁用电缆防火测试,请咨询中国防火网
全国免费咨询电话:400-666-7290  
网址:www.firete.com
...

MIL-W-22758电缆燃烧测试_海军标准MIL-W-22758电缆燃烧测试

MIL-W-22758 Tests on electric and optical fiber cables under fire conditions-Test for vertical flame propagation for a single insulated wire or cable.
MIL-W-22758着火条件下电缆和光缆的测试,单根绝缘电线电缆的垂直燃烧测试。

MIL-W-22758标准要求
电线电缆的燃烧破坏长度不超过76mm,并且滴落物不引燃垫片。

...

IEC 60332-2-2电缆单根燃烧测试_单根电缆IEC60332-2-2测试

IEC 60332-2-2 Tests on electric and optical fiber cables under fire conditions—Part 2-2: Test for vertical flame propagation for a single insulated wire or cable—Procedure for diffusion flame
IEC 60332-2-2着火条件下电缆和光缆的测试,单根绝缘电线电缆的垂直,蔓延测试,扩散火焰法。测试程序按照IEC60332-2-1进行。

...
分页:[«]6[7][8][9][10][11][12][13][14][15][16][17][18][19][20][»]

日历

Powered By DIN5510-2 DIN5510

中国防火网 版权所有