1. ASTM C591标准适用范围
1.1 This specification covers the types, physical properties, and dimensions of unfaced, preformed rigid cellular polyisocyanurate plastic material intended for use as thermal insulation on surfaces from -297°F (-183°C) to 300°F (149°C). For specific applications, the actual temperature limits shall be agreed upon by the manufacturer and purchaser.
...ASTM C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578 硬质多孔聚苯乙烯热绝缘材料标准规范
1. ASTM C578标准适用范围
1.1 This specification covers the types, physical properties, and dimensions of cellular polystyrene boards with or without facings or coatings made by molding (EPS) or extrusion (XPS) of expandable polystyrene. Products manufactured to this specification are intended for use as thermal insulation for temperatures from -65 to +165°F (-53.9 to +73.9°C). This specification does not apply to laminated products manufactured with any type of rigid board facer including fiberboard, perlite board, gypsum board, or oriented strand board.
...
FMVSS302阻燃要求小于100mm/min啥意思？南京睿督公司为您提供详细解答：即要求材料的燃烧速度每分钟小于100mm。
美标FMVSS302为汽车内装饰材料的燃烧性能测试标准，FMVSS302标准对汽车材料的防火阻燃有相关要求，南京睿督公司已协助众多汽车材料企业成功通过FMVSS302测试并取得测试报告。南京睿督公司咨询电话: 025-8658 3475。
FMVSS302标准阻燃等级要求
FMVSS302要求所有汽车内饰件材料的燃烧速度小于100mm/min。
...
ASTM C547 Standard Specification for Mineral Fiber Pipe Insulation
ASTM C547 预制矿物纤维管形绝热材料标准规范
ASTM C547标准适用范围
1.1 This specification covers mineral fiber insulation produced to form hollow cylinders for standard pipe and tubing sizes. The mineral fiber pipe insulation may be molded or precision v-grooved, with one or more walls split longitudinally for use on pipe temperatures up to 1400°F (760°C).
...ASTM C534/C534M 片状和管状预制韧性弹性的蜂窝状绝热材料的标准规范
ASTM C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
ASTM C534/C534M标准适用范围
1.1 This specification covers preformed flexible elastomeric cellular thermal insulation in sheet and tubular form. Grade 1 covers materials to be used on commercial or industrial systems with operating temperatures from -183 to 104°C [-297 to 220°F], Grade 2 covers material used on industrial systems with operating temperatures from -183 to 175°C [-297 to 350°F], and Grade 3 covers material used on industrial systems with operating temperatures from -183 to 120°C [-297 to 250°F] where halogens are not permitted.
...ASTM C209-2007 纤维素纤维绝热板的试验方法
ASTM C209-2007 Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM C209标准适用范围
1.1 These test methods cover those insulation products in specified Specification ASTM C208. The requirements for the products' physical properties are specified in Specification ASTM C208. The methods for the general insulation products' physical properties are given as follows:
南京睿督公司提供专业权威的第三方机构的EN4589-2极限氧指数测试报告。极限氧指数是指材料在氧和氮混合气体中当刚能支撑其燃烧时氧的体积分数浓度。氧指数高表示材料不易燃烧，氧指数低表示材料容易燃烧。EN4589-2标准是常用极限氧指数测试标准之一。EN ISO 4589-2塑料-用氧指数法测定燃烧行为-第2部分:室温测试。更多关于EN4589-2极限氧指数LOI值测试的详细内容，请咨询南京睿督公司，咨询电话：400-603-6575。
EN4589-2: Plastics-Determination of burning behaviour by oxygen index –Part 2: Ambient-temperature test
...
法国建筑材料及机车材料的防火M级根据NFP92-507标准进行评估，材料的防火等级划分为M0(M0/M1/M2/M3/M4)这五个等级。阻燃M0级为不燃等级，阻燃M1级为难燃等级，阻燃M2级为难易燃等级，阻燃M3级为可燃等级，阻燃M4级等级为易燃等级。南京睿督公司携手Cofrac资质法国国家实验室为您提供法标M1级测试报告，南京睿督公司咨询电话：025-8658 3475。
NFP92-507的M等级测试，根据产品的性质及厚度，其M等级的测试方法也不同，所有厚度的硬性材料及厚度超过5mm的软性材料的M等级测试根据NFP92-501标准进行测试；厚度不超过5mm的软性材料的M等级测试根据NFP92-503标准进行测试。
...EN13501-1 B级(又称为EN13501欧标防火等级B级)，对于许多公共场所防火要求都必须达到EN13501-1欧标B级或者以上防火等级。南京睿督公司与您分享欧盟防火标准EN13501-1的B级测试标准及测试要求。南京睿督公司为欧盟公告号实验室的授权合作机构，咨询电话：025-8658 3475。
EN 13501-1:2007+A1:2009: Fire classification of construction products and building elements –Part 1: Classification using date form reaction to fire tests.
...
ASTM D2485-91(2013) Standard Test Methods for Evaluating Coatings For High Temperature Service
ASTM D2485-91(2013) 评定高温设备用覆层的试验方法
1. ASTM D2485-91(2013)标准适用范围：
1.1 These test methods cover the evaluation of the heat-resistant properties of coatings designed to protect steel surfaces exposed to elevated temperatures during their service life. Two test methods are described as follows:
...