现在机车材料的有害物质限量是否达到可控的范围内越来越受关注。铁标TB/T 3139-2006是机车车辆内装材料及室内空气有害物质限量标准，南京睿督公司提供铁标TB/T3139-2006测试2015年最新报价。咨询电话：025-8658 3475。
铁标TB/T3139标准名称及测试项目：
TB/T3139-2006 机车车辆内装材料及室内空气有害物质限量(中华人民共和国铁道行业标准)
TB/T3139-2006 Decorating materials and indoor air limit of harmful substance for railway locomotive and vehicle.
GB/T 8174标准名称及简介
GB/T 8174-2008 Method of measuring and evaluation thermal insulation effects for equipments and pipes.
GB/T 8174-2008设备及管道绝热效果的测试与评价。
GB/T 8174-2008标准根据GB/T8174-1987《设备及管道保温效果的测试与评价》和GB/T16617-1996《设备及管道保冷效果的测试与评价》的内容整理、修订而成。GB/T 8174-2008标准同时代替GB/T8174-1987和GB/T16617-1996。南京睿督咨询电话：025-8658 3475。
...欧盟建筑产品的防火阻燃等级被划分为七个等级：A1、A2、B、C、D、E、F。所在在欧盟市场上生产、销售、流通的建筑产品及材料的防火等级必须至少达到EN13501-1中的E级。防火等级E级是建材防火的最基本等级。南京睿督公司与大家分享EN13501-1标准E级规定及测试内容，咨询电话：025-8658 3475。
EN13501-1防火等级E级测试标准及数据要求：
EN13501-1防火等级：根据EN ISO 11925-2标准进行测试并且同时符合要求。
...
巴黎RATP公司（Regie Autonome dea Transports Parisiens）,巴黎地铁现由巴黎大众运输公司（RATP）负责营运。在八十年代，RATP和SNCF制定法国标准：NF F16-101和NFF16-102，这份在1998年版本出具的NFF16-101法国轨道车辆的标准一直引用至今。两个法国公司对上述标准描述中塑料燃烧性能方面的许多发展做出了积极的贡献。咨询电话：025-8658 3475。
RATP实验室为法国COFRAC法国认可委员会认可的实验室。RATP具有法国和国际多种资质。许多厂商都十分信任RATP出具的测试报告及证书。中国防火网携手RATP实验室为广大客户提供法国COFRAC资质NFF16-101测试报告及证书，咨询电话：400-666-7290。
...ASTM C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C612 隔热的矿物纤维块材和板材标准规范
This specification covers mineral fiber block and board thermal insulation. Mineral fiber board insulation covered by this specification shall be classified into types and categories; category 1 - no compressive resistance properties are required, category 2 - minimum compressive resistance properties are required, type V, grade A - requires no heat-up schedule, type V, grade B - heat-up schedule is required. Mineral fiber block and semi-rigid and rigid board insulation shall be composed of rock, slag, or glass processed from the molten state into fibrous form and bonded with organic or inorganic binders or both. A detectable odor of objectionable nature recorded by more than two of five panel members shall constitute rejection. When tested and evaluated, the corrosion resulting from insulation in contact with steel plates shall be judged to be no greater than for comparative plates in contact with sterile cotton. When tested and evaluated at its delivered thickness, all mineral fiber (rock, slag, and glass) board and block must qualify to be semi-rigid or rigid. When tested, the board and block insulation shall not warp, flame, or glow during hot surface exposure. When tested, the midpoint temperature shall not at any time exceed the hot surface temperature by more than 200°F (111°C). Determine the thermal conductivity as a function of temperature for the representative specimens with data obtained from a series of thermal tests. The compressive resistance, linear shrinkage, water vapour sorption, odor emission, and rigidity or semi-rigidity shall be tested to meet the requirements prescribed.
...
ASTM C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM C553 商用和工业用矿物纤维毡隔热的标准规范
This specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at certain temperatures. The orientation of the fibers within the blanket is primarily parallel to the principal surface (face). The mineral fiber blanket insulation shall be classified into seven types: Types I, II, III, IV, V, VI, and VII. The classification is based upon the insulations' maximum use temperature and apparent thermal conductivity. Mineral fiber blanket insulation shall be composed of rock, slag, or glass processed from the molten state into fibrous form bonded with an organic or inorganic binder, or both. Asbestos shall not be used as an ingredient or component part of the product. Different test methods shall be performed on the insulation to determine the following properties: odor emission, corrosiveness to steel, non-fibrous content, maximum use temperature, maximum exothermic temperature rise, apparent thermal conductivity, water vapor sorption, flexibility, rigidity, and surface burning characteristics.
...我司南京睿督公司专业从事动车组、高铁、地铁等轨道车辆材料的防火阻燃、烟雾毒性检测上十年，防火烟毒测试方面拥有丰富经验，南京睿督公司咨询电话：025-8658 3475。
TL/CL 311-2013 动车组避雷器（暂行）
TL/CL 312-2013 动车组充电机（暂行）
TL/CL 313-2013 动车组电线电缆（暂行）
TL/CL 314-2013 动车组电阻制动装置（暂行）
TL/CL 315-2013 动车组辅助变流器（暂行）
...
我司南京睿督公司专业从事动车组、高铁、地铁等轨道车辆材料的防火阻燃、烟雾毒性检测上十年，防火烟毒测试方面拥有丰富经验，南京睿督公司咨询电话：025-8658 3475。
TL/CL 291-2013 动车组餐车上货门（暂行）
TL/CL 292-2013 动车组车钩及缓冲装置（暂行）
TL/CL 293-2013 动车组车体（暂行）
TL/CL 294-2013 动车组空调废排装置（暂行）
TL/CL 295-2013 动车组空调换气装置（暂行）
...
CAN/ULC-S706 建筑木质纤维隔热标准(ULC 706)
CAN/ULC-S706 Standard for wood fibre thermal insulation for buildings.Standard by Underwriters Laboratories of Canada.
我们还提供各种加拿大防火阻燃测试
加拿大CAN/ULC S102/135认证 http://www.firete.com/popular_standards/7922.html
...
ASTM C523-1968(1987) Standard test method for light reflectance of acoustical materials by the integreting sphere reflectometer
ASTM C523-1968(1987) 对声学材料由积分球反射撤回的光反射率的测试方法。
ASTM 903反射率测试 http://www.fire-test.com/teststandard/usa/7146.html
...
