CAN/ULC S712.1 Standard for Thermal Insulation - Light Density, Open Cell Spray Applied Semi-rigid Polyurethane (CAN/ULC S712.1-10)
CAN/ULC S712.1 保温绝缘标准-轻密度，开放式喷涂应用半刚性聚氨酯
我们还提供各种加拿大防火阻燃测试
加拿大CAN/ULC S102/135认证 http://www.firete.com/popular_standards/7922.html
...
ULC CAN/ULC S705.1 Standard for Thermal Insulation-Spray Applied Rigid Polyurethane Foam, Medium Density-Material-Specification
ULC CAN/ULC S705.1 保温绝缘材料标准－喷涂硬质聚氨酯泡沫塑料,中密度－材料－规范
CAN/ULC S705.2 Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Application (CAN/ULC S705.2-05)
...
国家大力发展地铁、高铁、动车组等轨道车辆行业且铁路标准也快速发展，轨道车辆材料要求烟火毒应满足TB/T 3138、TB/T 3139标准要求，南京睿督公司提供TB/T3138阻燃测试与TB/T3139有害物质限量测试，更多关于TB/T 3138、TB/T 3139测试详细内容，请咨询南京睿督公司，咨询电话：025-8658 3475。
1. 烟火毒及有害物质测试标准
TB/T3139-2006 机车车辆内装材料及室内空气有害物质限量(中华人民共和国铁道行业标准)
...
CAN/ULC S704 Thermal insulation, Polyurethane and polyisocyanurate board, faced
CAN/ULC S704 保温绝缘材料-聚氨酯和聚异氰脲酸酯板-表面
我们还提供各种加拿大防火阻燃测试
加拿大CAN/ULC S102/135认证 http://www.firete.com/popular_standards/7922.html
...
CAN/ULC S703 Standard for Cellulose Fibre Insulation (CFI) for Buildings (CAN/ULC S703)
CAN/ULC S703 建筑用纤维素绝缘标准
CAN/ULC S703标准适用范围
This CAN/ULC S703 Standard specifies requirements for treated wood-based cellulose fibre intended for use as thermal insulation (Cellulose Fibre Insulation, CFI) in new and existing buildings within the temperature range of -60 °C to 90 °C.
南京睿督公司提供英国UKAS资质（英国皇家认可委员会认可实验室资质）LUL Standard 1-085英国伦敦地铁协会防火烟毒测试报告。LUL 1-085防火标准英国伦敦地铁协会London Underground Limited (LUL)。London Underground Limited (LUL), Category: Cat 1, Number: 1-085, Issue Number: A3, Issue date: March 2011 英国伦敦地铁协会防火测试。南京睿督提供英国UKAS资质的LUL证书，咨询电话：025-8658 3475。
...ASTM E2568 Standard Specification for PB Exterior Insulation and Finish Systems
ASTM E2568 外墙外保温及饰面系统规格
ASTM E2568标准适用范围
1.1 This specification covers PB Exterior Insulation and Finish Systems (EIFS) defined as an exterior, non-bearing wall covering providing a weather-resistant exterior wall envelope on walls required to be combustible or noncombustible, fire-resistance-rated or nonfire-resistance-rated. Further, PB EIFS is a system described as being applied over expanded polystyrene or polyisocyanurate insulation board, an adhesive or mechanical attachment of the insulation board to a substrate, or both, glass fiber reinforcing mesh, a base coat on the face of the insulation board, and a textured protective finish coat.
...
汽车材料的阻燃防火性能是十分重要性能要求之一。FMVSS302是美国汽车材料防火阻燃测试标准，主要在规定时间内的测试产品的燃烧破坏长度及燃烧速度等。FMVSS302 联邦交通车辆的内部装饰材料的燃烧性能。南京睿督公司提供FMVSS302中文版标准及测试报告,咨询电话：025-8658 3475。
FMVSS302标准目的及适用范围
本FMVSS302标准说明了对汽车乘客车厢使用材料的阻燃性的要求。本标准的目的旨在减少车辆发生火灾时所造成的伤亡，尤其是那些起源于车厢内部如火柴或香烟引起的火灾。
...
ISO 8990 Thermal insulation-Determination of steady-state thermal transmission properties-Calibrated and guarded hot box
ISO 8990 绝热-稳态传热性质的测定标定和防护热箱法 ISO8990:1994(E)与GB/T13475-2008标准类似。
我们同时还提供美标的各种防火测试
NFPA130美国防火测试 http://www.fire-test.com/teststandard/usa/3239.html
...
BS EN ISO 12567-1 Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method. Part 1: Complete windows and doors
BS EN ISO 12567-1 门窗的热性能.加热箱法测定热传递系数.完整的门窗
BS EN ISO 12567-1适用范围
This part of ISO 12567 specifies a method to measure the thermal transmittance of a door or window system. It is applicable to all effects of frames, sashes, shutters, blinds, screens, panels, door leaves and fittings. It is not applicable to - edge effects occurring outside the perimeter of the specimen, - energy transfer due to solar radiation on the specimen, - effects of air leakage through the specimen, and - roof windows and projecting products, where the external face projects beyond the cold side roof surface. NOTE For roof windows and projecting units, see the procedure given in ISO 12567-2. Annex A gives methods for the calculation of environmental temperatures.
