ASTM D2126-15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2126-15 硬质泡沫塑料对热和潮湿老化灵敏度的试验方法
ASTM D2126标准适用范围
1.1 This test method covers procedures for the thermal and humid exposure of rigid cellular plastics. Conditions used shall be agreed upon between the purchaser and the supplier.
...
ASTM D1761-12 Standard Test Methods for Mechanical Fasteners in Wood
ASTM D1761-12 木结构中机械紧固件的试验方法
ASTM D1761标准适用范围
1.1 These test methods provide a basic procedure for evaluating the resistance of wood and wood-base materials to direct withdrawal of nails, staples, and screws. Spikes are included as nails in this standard.
...ASTM D1623-2009: 硬质泡沫塑料抗张性和抗拉附着力的试验方法
ASTM D1623-2009: Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
我们还提供各种美标防火测试
美国NFPA130测试 http://www.firete.com/fire_standard/railway/166.html
...
ISO 10580-2010 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions
ISO 10580-2010 弹性织物和层压地板覆盖物-挥发性有机化合物(VOC)释放的试验方法
我们同时还提供铁标TB/T3237、TB/T3139、TB/T3138测试、BS6853、DIN5510等动车地铁高铁等车辆测试：
...
EN13893 Resilient,laminate and textile floor coverings-Measurement of dynamic coefficient of friction on dry floor surfaces
EN13893 弹性地板覆盖物、叠层地板覆盖物和铺地织物-干地板表面动态磨擦系数的测量
EN13893欧洲地板摩擦系数测试，测定地板的防滑性能，在EN 14041中规定要不小于0.3，产品范围包括：弹性地板，强化地板，纺织地板/地毯等。
...ASTM C1363-2011 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C1363-2011 用高温实验室法测定建筑材料和包装组件热性能的标准试验方法
ASTM C1363-2011 test method establishes the principles for the design of a hot box apparatus and the minimum requirements for the determination of the steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. This method is also used to measure the thermal performance of a building material at standardized test conditions such as those required in material specifications ASTM C739, ASTM C764, ASTM C1224 and practice ASTM C1373.
...CAN/ULC-S711.1 Thermal insulation-Bead-Applied two component polyurethane air sealant foam, part 1: Material specification.
CAN/ULC-S711.1 保温绝缘材料-珠子-应用于双组分的聚氨酯空气密封发泡材料，第1部分：材料规范。
CAN/ULC-S711.2 Thermal insulation-Bead Applied two component polyurethane air sealant foam, part 2: Application
...
CAN/ULC-S710 Thermal insulation, polystyrene, Boards and pipe covering
CAN/ULC-S710 保温绝缘材料，聚苯乙烯，板和管
CAN/ULC-S710.1 Thermal insulation-Bead-Applied one component polyurethane air sealant foam, part 1: Material specification.
CAN/ULC-S710.1 保温绝缘材料-珠子-应用于一组分的聚氨酯空气密封发泡材料，第1部分：材料规范。
CAN/ULC-S701 Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering
CAN/ULC-S701保温材料，聚苯板和涂层管测试标准。
CAN/ULC-S701标准描述
The CAN/ULC-S701 Standard specifies the requirements for factory made rigid polystyrene insulation in the form of pipe covering and boards with or without facings or coatings made by moulding of pre-expanded beads (EPS) or extrusion of polystyrene (XPS). This Standard does not apply to laminated products manufactured with any type of rigid board facer including fibreboard, perlite board, gypsum board, or oriented strand board.
...
CAN/ULC S702 Mineral Fibre Thermal Insulation For Buildings-Part 2: Application Guidelines.
CAN/ULC S702 标准矿物纤维保温在建筑方面，第2部分：应用指南。
我们还提供各种加拿大防火阻燃测试
加拿大CAN/ULC S102/135认证 http://www.firete.com/popular_standards/7922.html
...
