BS 476 Part 11:1982 Fire tests on building materials and structures, Part 11: Method for assessing the heat emission from building materials.
BS 476 Part 11:1982建筑材料及构件防火测试，第11部分：建筑材料热辐射性能测试方法。
更多BS476-11热辐射性能测试，请咨询中国防火网
中国防火网全国免费咨询电话：400-666-7290
...
BS 476 Part 8:1972 Fire tests on building materials and structures. Test methods and criteria for the fire resistance of elements of building construction.
BS 476 Part 8:1972建筑材料及构件防火测试,建材耐火性测试。
更多BS476-8耐火性测试，请咨询中国防火网
中国防火网全国免费咨询电话：400-666-7290
...
ASTM E662:2009 Standard test method for specific optical density of smoke generated by solid materials
ASTM E662:2009固体材料产烟量烟密度测试.
更多ASTM E662烟密度测试，请咨询中国防火网
中国防火网全国免费咨询电话：400-666-7290
网址：www.firete.com
...
AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter
AS/NZS 3837:1998使用氧消耗热量计测试材料及产品的热量与烟释放量的测试方法.
AS/NZS 3837测试指标
(a) 热释放率，由氧气消耗量决定(Rate of heat release, by measurement of the oxygen consumption, as determined by the oxygen concentration and the flow rate in the exhaust product stream);
(b) 有效热燃烧值和物质质量损失率(Effective heat of combustion from a concomitant measurement of specimen mass loss rate, in combination with the heat release rate);
(c) 烟释放率(Smoke release, by obscuration of light by the combustion product stream);
(d) 可燃性 ，产品加热后从不燃到可燃的时间(Ignitability, as a measurement of time from initial exposure to time of sustained flaming)。
BS EN ISO 9773:1999 Plastics-Determination of burning behavior of thin flexible vertical specimens in contact with a small-flame ignition source.
BS EN ISO 9773:1999 塑料.立式软薄试样与小火焰源接触的燃烧性能测定
【摘要】: The project specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically oriented thin and relatively flexible plastics specimens exposed to low-energy-level flame ignition source. The classification system described is intended for quality control and the preselection of component materials for products.
...ASTM C564 Standard Specification for Rubber gaskets for cast iron soil pipe and fittings污水铸铁管及管配件用橡胶垫圈标准规范
This ASTM C564 specification defines the required properties of lock-strip gaskets where resistance to sunlight, weathering, flame, oxidation, permanent deformation under load, and diminution of gripping pressure are prime essentials.
...
IRIS-International Railway Industry Standard 国际铁路行业标准。它是一套铁路行业质量管理体系标准，是铁路行业的质量评估体系。
IRIS认证的目的是持续开发和执行一个通用的全球化系统来评估针对铁路工业的运营管理体系。Aims to continue to develop and implement a common global system for the evaluation of business management systems specific to the railway industry.
ASTM E408: Test method for total normal emittance of surface using inspection-Meter Techniques.
ASTM E408: 用检测计技术测定表面总发射量的试验方法。
为了减少屋面温度上升，减少热岛效应，从而将热岛对小气候、人类以及动物居所的影响降至最低。越来越多的国家开始大力提倡使用高辐射率的屋面材料。根据ASTM E1980方法进行测量，屋面面积75％以上区域的辐射率不得低于0.90。对新建筑的要求是，根据ASTM E1980方法计算的太阳能反射指数SRI值不得低于78。
...
NFF19-201:1996 铁路运行材料，油漆产品，标记及说明文字。
NFF19-201:1996 Railway rolling stock-Paint material and marks- General instructions and tests method.
NFF19-201油漆涂料的性能测试
油漆涂料产品的化学特性，物理化学特性和使用，这些特性在NFF19-201标准中表2至表4的实验中显示。
...
