Home station  
Set as homepage Add to favorites   中文版 English
 
Testing to: Rolling Stock Component | Construction material | Marine material | Aircraft material | Firefighting Device | Furniture | E& E equipment
   
User name:
Password:
Code:
   
Fire standard
RailwayMarineBusBuilding
Test method More>>
BS 476-6:1989+A1:2009 fire...
BS 476-7:1997 Classificati...
BS 476-20:1987 fire resist...
BS ISO 4589-2:2006-06
NF P 92-501: M classificat...
NF P 92-503: M classificat...
NF P 92-504: Speed of spre...
ASTM E 662: Smoke density ...
ASTM E 648 Flooring test
ASTM E 162: surface flamma...
 
Home   Train   EN 45545-2:2010 Cable testing
 

EN 45545-2:2010 Cable testing

Cable testing for EN45545-2:2013

 

EN 45545-2 Railway applications-Fire protection on railway vehicles Part 2: Requirements for fire behaviour of materials and components.

 

EN 45545-2 according to the product end-use, divided into R1-R26 level, R14-Interior cable, R15-Exterior cable.

 

As the cable flame spread and burning rate of destruction of the length of the combustion smoke density (light penetration) and the burning of hazardous toxic gas escape on the staff of life play a very important influence. In general, testing cables through these areas to assess.

 

Cable testing standard for EN45545-2:2013

BS EN 50266-2-4: Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C (cable diameter ≥12mm)

BS EN 50266-2-5: Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category D (cable diameter 12mm)

EN 50306 Section 9.1.1: Railway applications-Railway rolling stock cables having special fire performance-thin wall (6mmcable diameter12mm)

EN 50306 Section 9.1.2: Railway applications-Railway rolling stock cables having special fire performance-thin wall (cable diameter≤6mm)

DIN EN 60332-1-2: DIN EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions—Part 1-2: Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 KW pre-mixed flame and is for general use

EN 61034-2: smoke density

EN 50268-2: smoke density

NF X 70-100 600 CIT cable: toxicity testing

、、、、、、

 

CEN/TS EN45545 

CEN/TS EN45545-Fire protection of railway vehicles

CEN/TS EN45545-1 Part1:Gerneral

CEN/TS EN45545-2 Part2:Requirements for fire behaviour of materials and components

CEN/TS EN45545-3 Part3:Fire resistance  requirement for  fire barriers and partitions

CEN/TS EN45545-5 Part5:Fire safety requirements for electrical equipment including that of trolley buses, track guided and magnetic levitation vehicles

CEN/TS EN45545-6 Part 6:Fire control and management system

CEN/TS EN45545-7 Part7:Fire safety requirements for flammable liquid and flammable gas installations

 

Tel: (+0086) 25-8658 3475  Tel: (+0086) 400-666-7290


 Source:防火网  Addtime:2010-8-3 Hits:6154

 Previous: NFPA 130:2010 Cable testing

 Next: GB/T 12528-2008 Cable testing
 
 
Home | Fire Test & Certification | Standard | News | Product | Exhibition | Flame retardant | On-line consultation | Contact us
Copyright © 2008-2011 Firete.com All Right Reserved
TEL:(+86)-25-8658 3475