ASTM C488进行隔热成品外部曝露试验的标准试验方法

ASTM C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
ASTM C488 进行隔热成品外部曝露试验的标准试验方法

Both physical and chemical changes may occur from weather exposure, and these changes affect performance properties, service life, and maintenance schedules. For this reason, tests of properties relating to performance should be made both before and after specific periods of outdoor exposure.
This test method recognizes that differing geographical locations, environmental conditions, differences between surface temperatures and ambient temperatures, and test durations may have extremely varied effects upon the test results.
This test method is to be used for comparative qualitative testing.
1. Scope
1.1 This test method covers out-of-doors exposure testing of finishes that are normally field-applied to thermal insulation which may include joints or joint sealants, or both. Such exposure may be essential prior to the determination of certain physical properties. This test method may also indicate compatibility problems between the joint sealant and the finish as well as the ability of the finish to span a dry joint. This test method is not intended to evaluate mildew resistance, efflorescence, or chemical resistance.
Note 1—For testing free plastic films, see Practice D1435.
1.2 This test method does not prescribe the method of application, test duration, or inspection intervals.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM C168 Terminology Relating to Thermal Insulation
ASTM D1435 Practice for Outdoor Weathering of Plastics
Index Terms
coatings; exterior exposure test; test procedure; vapor barrier finishes; Coatings (thermal insulating materials); Exterior exposure tests; Field testing--thermal insulation; Thermal insulating materials; Vaporbarriers;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：12/24/2013 點擊次數：983