ASTM D4208用氧弹燃烧/离子选择电极法对煤中总氯含量的试验方法

ASTM D4208 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D4208 用氧弹燃烧/离子选择电极法对煤中总氯含量的试验方法

The purpose of this test method is to measure the total chlorine content of coal. The chlorine content of coals may be useful in the evaluation of slagging problems, corrosion in engineering processes, and in the total analysis of coal and coke. When coal samples are combusted in accordance with this method, the chlorine is quantitatively retained and is representative of the total chlorine content of the whole coal.

1. Scope
1.1 This test method covers the analysis of total chlorine in coal.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D1193 Specification for Reagent Water
ASTM D3173 Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM E144 Practice for Safe Use of Oxygen Combustion Bombs
ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Index Terms
chlorine content-coal; coal and coal products; combustion bomb method; Ion selective electrode method; oxygen bomb method;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 來源：防火網　發布時間：12/24/2013 點擊次數：1277