ASTM D3340用火焰光度计策动润滑油脂中锂和钠试验方法

ASTM D3340 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D3340 用火焰光度计策动润滑油脂中锂和钠试验方法
Lubricating greases can contain the lithium soap of hydroxy stearic acid or the sodium soap of various fatty acids as thickeners. The determination of total lithium or total sodium is a measure of the amount of thickener in the grease.

1. Scope
1.1 This test method covers determination of the lithium and sodium content of lubricating greases by means of a flame photometer.
1.2 A multi-element analysis method for greases, which includes the measurement of lithium and sodium concentrations using inductively couple plasma-atomic emission spectroscopy (ICP-AES), is available in Test Method D 7303.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.The preferred units are mass %.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D1193 Specification for Reagent Water
ASTM D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6792 Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D7303 Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
Index Terms
flame photometer; lithium content; lubricating grease; sodium content; thickener; Flame emission spectrometry; Lithium content; Lubricating grease; Sodium content--petroleum products; Spectrophotometry--flame photometry;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：12/19/2013 點擊次數：1035