ASTM D1048橡胶绝缘毡层的标准规范

ASTM D1048 Standard Specification for Rubber Insulating Blankets
ASTM D1048 橡胶绝缘毡层的标准规范

This specification covers the acceptance testing of insulating rubber blankets that are used for the personal protection of workers from accidental contact with live electrical conductors, apparatus, or circuits. Two types of blankets, differing in chemical and physical characteristics, are provided and are designated as: Type I, made from properly vulcanized high-grade cis-1,4-polyisoprene rubber compound of natural or synthetic origin that is non-resistant to ozone; and Type II, made of any elastomer or combination of elastomeric compounds that is resistant to ozone. Five classes of blankets, designated as Classes 0, 1, 2, 3, and 4, are assigned according to electrical protection characteristics. Styles of blankets are designated in accordance to construction characteristics, namely: Style A, blankets free of any reinforcements; and Style B, blankets incorporated with reinforcement(s). When evaluated in accordance with the test procedures detailed herein, the blankets shall adhere to the following property requirements: electrical properties such as phase-phase maximum use voltage, AC and DC proof-test voltages, AC and DC dielectric breakdown test voltages, and AC and DC clearances; and physical and chemical properties such as ozone resistance, moisture absorption, tensile strength, tension set, elongation, drape stiffness, flex stiffness, tear resistance, resistance to accelerated heat aging, and puncture resistance.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope
1.1 This specification covers acceptance testing of rubber insulating blankets for protection of workers from accidental contact with live electrical conductors, apparatus, or circuits.
1.2 Two types of blankets are provided and are designated as Type I, not resistant to ozone, and Type II, resistant to ozone.
1.3 Five classes of blankets, differing in electrical characteristics, are provided and are designated as Class 0, Class 1, Class 2, Class 3, and Class 4.
1.4 Two styles of blankets, differing in construction characteristics, are provided and are designated as Style A and Style B.
1.5 The following safety hazards caveat pertains only to the test method portion, Sections 16-19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
 
2. Referenced Documents (purchase separately)
American National Standards
C84.1 Electric Power Systems and Equipment--Voltage Ratings (60 Hz)
ASTM Standards
ASTM D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D297 Test Methods for Rubber Products--Chemical Analysis
ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension
ASTM D518 Test Method for Rubber Deterioration--Surface Cracking
ASTM D570 Test Method for Water Absorption of Plastics
ASTM D573 Test Method for Rubber--Deterioration in an Air Oven
ASTM D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D1388 Test Method for Stiffness of Fabrics
ASTM D2865 Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM F819 Terminology Relating to Electrical Protective Equipment for Workers
Index Terms
electrical insulating blanket; lineman; lineman protective equipment; A-C (alternating-current)-proof voltage; Blankets--rubber insulating; D-C proof test; Dielectric proof voltage; Electrical power systems--specifications; Electrical protective equipment--specifications; Ozone (O3) resistance; Puncture testing; Thickness; Electrical insulating materials--specifications; Voltage;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：12/9/2013 點擊次數：1141