美国轨道车辆防火烟毒测试标准NFPA130引用ASTM E 1354热释放速率测试来评估材料的防火性能，同时接合ASTM E662烟密度测试标准来综合评定。NFPA130标准为载客轨道车辆的系统要求。对于小部件产品可以根据ASTM E 1354标准来进行测试。更多关于ASTM E 1534及NFPA130标准要求请咨询南京睿督公司，咨询电话：025-8658 3475。
If the surface are of any individual small part is less than 100cm2 in end use configuration, materials used to fabricate such a part should be permitted to be tested in accordance with ASTM E1354 as an alternative to both the ASTM E162 flammability test procedure or the appropriate flammability test procedure otherwise specifies in Table 8.4.1 and test ASTM E662 smoke generation test procedure.
ASTM E 1354材料热释放量及烟雾释放速率测试标准名称： ASTM E 1354-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter ASTM E 1354-17 耗氧量法测定材料释热及烟雾释放速率方法
ASTM E 1354材料热释放量及烟雾释放速率测试参考指标： (a) 热释放率，由氧气消耗量决定(Rate of heat release, by measurement of the oxygen consumption, as determined by the oxygen concentration and the flow rate in the exhaust product stream); (b) 有效热燃烧值和物质质量损失率(Effective heat of combustion from a concomitant measurement of specimen mass loss rate, in combination with the heat release rate); (c) 烟释放率(Smoke release, by obscuration of light by the combustion product stream); (d) 可燃性，产品加热后从不燃到可燃的时间(Ignitability, as a measurement of time from initial exposure to time of sustained flaming)。
ASTM E 1354材料释热及烟雾释放速率测试摘要： ASTM E 1354测试方法用于确定材料及产品的可燃性，热释放速率，质量损失率，燃烧的有效热量，和可见烟雾量。 该测试方法主要目的是确定热量的变化，也包括测定燃烧的有效热量，质量损失率，持续燃烧时间，和烟雾量。该属性确认在最终用途上有代表性的小规格样本。
蘇公網安備 32010502010088號
測試服務：
主要阻燃防火認證標準
