| EN13501-2耐火测试标准
建筑产品根据EN13501-2进行耐火测试，测试各种结构构件在标准受火条件下的耐火性能。
EN 13501-2:2007 Fire classification of construction products and building elements-Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 13501-2:2007 欧盟建筑产品及构件的耐火性能分类，第2部分:通风设备除外耐火试验数据分类。
EN13501-2耐火测试项目
样品根据如下方面：承重性(Loadbearing capacity-R)、完整性(Intergrity-E)、隔热性(Insulation-I)等这些方面进行评估，样品是否通过EN13501-2耐火测试。
EN13501-2耐火测试方法
样品暴露在特定的高温高压条件下，样品的性能按照标准要求进行检测。在申请时间内看测试样品是否满足评估标准。样品在实验室测试时间内满足，但是不能直接反映真实的火灾持续发生时的情况。
EN13501-2耐火测试时间
EN13501-2的测试时间可以为30分钟，60分钟，90分钟，120分钟，150钟，180分钟等，具体时间根据客户要求及产品性能而定。
EN13501-2耐火测试对象
EN13501-2进行如下产品的耐火测试：墙壁、地板、天花板、横梁、柱子、阳台、人行通道、楼梯、门窗、通风口，连接处、烟囱、架空地板、防静电地板等产品。
EN13501-2耐火测试相关标准
BS476-20:1987 Method for determination of the fire resistance of elements of construction (general principles)
BS 476-20:1987建筑构件耐火的测定方法(一般原理)
BS476-21:1987 Methods for determination of the fire resistance of loadbearing elements of construction
BS476-21:1987 承重构件耐火的测定方法
BS476-22:1987 Methods for determination of the fire resistance of non-loadbearing elements of construction
BS476-22:1987非承重建筑构件耐火性能测试方法
EN1634-1 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware, part 1: fire resistance test for doors, shutters and openable windows.
EN1634-1 门，百叶窗和可开窗组合及建筑五金元件的耐火性和烟雾控制试验，第1部分：门，百叶窗和可开窗组合的耐火测试。
ASTM E119 Standard test method for fire tests of building construction and materials
ASTM E119 建筑材料耐火测试标准
EN 13501-1:2007+A1:2009: Fire classification of construction products and building elements –Part 1: Classification using date form reaction to fire tests.
EN 13501-1:2007+A1:20099:建筑产品和部件燃烧性能的分类-第1部分: 根据燃烧试验反应的试验数据进行分类。
EN13501-2:2007+A1:2009参考标准
EN1363-2: Fire resistance tests-Part 2: Alternative and additional procedures.
EN1364-1: Fire resistance tests for non-loadbearing elements-Part 1: Wall
EN1364-2: Fire resistance tests for non-loadbearing elements-Part 2: Ceilings
EN1364-3: Fire resistance tests for non-loadbearing elements-Part 3: Curtain walling-full configuration (complete assembly)
EN1365-1: Fire resistance tests for loadbearing elements-Part 1: Wall
EN1365-2: Fire resistance tests for loadbearing elements-Part 2: Floors and roofs
EN1365-3: Fire resistance tests for loadbearing elements-Part 3: Beams
EN1365-4: Fire resistance tests for loadbearing elements-Part 4: Columns
EN1365-5: Fire resistance tests for loadbearing elements-Part 5: Balconies and walkways
EN1365-6: Fire resistance tests for loadbearing elements-Part 6: Stairs
EN1366-3: Fire resistance tests for service installations-Part 3: Penetration seals
EN1366-4: Fire resistance tests for service installations-Part 4: Linear joint seals
EN1366-5: Fire resistance tests for service installations-Part 5: Service ducts and shafts
EN1366-6: Fire resistance tests for service installations-Part 6: Raised access and hollow core floors
EN1366-7: Fire resistance tests for service installations-Part 7: Conveyor systems and their closures
EN1634-1: Fire resistance tests for door and shutter assemblies-Part 1: Fire doors and shutters
EN1634-3: Fire resistance tests for door and shutter assemblies-Part 3: Smoke control doors and shutters
EN13216-1: Chimneys-Test methods for system chimney-Part 1: General test methods
CEN/TS 13381-1: Test methods for determining the contribution to the fire resistance of structural members-Part 1: Horizontal protective membranes.
ENV13381-2: Test methods for determining the contribution to the fire resistance of structural members-Part 2: Vertical protective membranes.
ENV13381-3: Test methods for determining the contribution to the fire resistance of structural members-Part 3: Applied protection to concrete members.
ENV13381-4: Test methods for determining the contribution to the fire resistance of structural members-Part4: Applied protection to steel members.
ENV13381-5: Test methods for determining the contribution to the fire resistance of structural members-Part 5: Applied protection to concrete/profiled sheet steel composite members.
ENV13381-6: Test methods for determining the contribution to the fire resistance of structural members-Part 6: Applied protection to concrete filled hollow steel columns.
ENV13381-7: Test methods for determining the contribution to the fire resistance of structural members-Part 7: Applied protection to timber members.
EN 14600: Doorsets and openable windows with fire resisting and/or smoke control characteristics-Requirements and classification.
EN ISO 13943:2000 Fire safety-Vocabulary(ISO 13943:2000)
中国防火网免费咨询电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com
...
|
蘇公網安備 32010502010088號
測試服務：
主要阻燃防火認證標準
