EN 12211 & EN12210抗風壓測試及等級評估
門窗在歐盟市場上銷售需要符合EN14351-1歐盟強制CE認證，其中抗風壓測試是CE認證的強制專案之一。門窗抗風壓測試按照標準EN 12211（測試方法）和 EN 12210（性能分級）進行。南京睿督深入解析EN 12211標準的內容、測試流程以及認證要求，説明製造商和貿易商更好地理解並滿足歐盟市場的合規性需求。南京睿督公司為歐盟NB1301和NB1020公告機構的國內授權機構，同時擁有國內本地工廠20年歐盟CE認證的實際認證經驗。諮詢電話：+86 25-86583475。
EN 14351-1門窗CE認證哪些項目是必測項目？請參考 https://www.fire-test.com/newsinfo/11155693.html
EN14351-1門窗CE認證及EN12211&EN12210風壓測試及評估
在歐盟市場銷售的門窗產品，若宣稱符合EN14351-1及EN12211&EN12210標準，必須通過歐盟NB認可的實驗室測試並取得相應認證。認證流程通常包括：
1. 樣品準備：選擇代表性產品送檢。
2. 實驗室測試：由具備資質的實驗室執行EN14351-1及EN12211測試能力。
3. 報告與證書：測試通過後，頒發符合性證書，並標注產品的抗風壓等級。
Wind Resistance According to the standards EN 12210 and EN 12211
According to the standards EN 12210 and EN 12211, doors are tested for their resistance to wind. In these tests, the door is repeatedly subjected to increasing pressure in both directions to simulate the effect of strong winds.
It is important that the door remains stable and that no parts such as panes, door closers or handles are torn from their anchorage.
Classification of wind load resistance
The resistance of doors to wind loads is divided into different classes according to the DIN EN 12210 standard, depending on the requirements of the building and the location. The classification ranges from class 1 to class 5, with higher classes representing higher wind loads.
The specific requirements are:
Class 1: wind pressure of 400 Pa, test pressure of 600 Pa
Class 2: wind pressure of 800 Pa, test pressure of 1200 Pa
Class 3: wind pressure of 1200 Pa, test pressure of 1800 Pa
Class 4: wind pressure of 1600 Pa, test pressure of 2400 Pa
Class 5: wind pressure of 2000 Pa, test pressure of 3000 Pa
There are also special classifications (Exxxx) for doors that must withstand even higher loads than the regular classes.
Deformation criteria
Another important aspect in the assessment of wind load resistance is the deformation criteria. These determine how much a door can deform under wind load without its function being impaired.
The deformation is measured in terms of the relative frontal deflection and divided into classes:
Class A: Deformation less than l/150 (maximum permissible deformation)
Class B: deformation less than l/200 (maximum permissible deformation)
Class C: deformation less than l/300 (maximum permissible deformation)
在歐洲，門窗產品若要加貼CE標誌，通常需要符合產品標準 EN 14351-1 的要求。該標準會引用EN 12211作為測試方法，並引用EN 12210作為性能分級依據。製造商需根據測試結果，在產品技術檔中聲明其抗風壓等級。
EN14351-1門窗歐盟CE認證需要包括：抗風壓測試、水密性測試、氣密性測試等主要性能和要求。南京睿督公司為歐盟NB1301和NB1020公告機構的國內授權機構，同時擁有國內本地工廠20年歐盟CE認證的實際認證經驗。南京睿督工程師與您分享建材CE認證及DoP產品性能聲明。諮詢電話：+86 25-86583475。
南京睿督公司為歐盟公告號Notified Body實驗室授權合作機構，可以直接受理各類建築產品CE認證及ETA認證
南京睿督全國免費諮詢電話：+86 25 8658 3465 +86 25-8658 3475
網址：www.hksmartps.com www.cprce.com
郵箱：info@hksmartps.com
微信：firetesting 或 17714189018
...
|
蘇公網安備 32010502010088號
測試服務：
主要阻燃防火認證標準
