NFPA130:2010 standard for Cable and Wire Test

NFPA 130: Standard for Fixed Guideway Transit and passenger Rail Systems. As more and more cable manufactory has been required the cable product need to comply with NFPA130:2010 standard, now I would like to share the updated information of NFPA130 standard with the cable producer.

As the cable flame spread and burning rate of destruction of the length of the combustion smoke density (light penetration) and the burning of hazardous toxic gas escape on the staff of life play a very important influence.

Cable for NFPA130 the main concern:

FT4/IEEE1202: cable for flame-Propagation testing, the cable damage height is to be less than 1.5m.

NFPA262: the total smoke release and the peak smoke release rate, generating a maximum peak optical density of smoke of 0.5 and a maximum average optical density of smoke of 0.15.

ANSI/UL1685: The cable damage height, the total smoke release and the peak smoke release rate.

IEC 60331-11: Be capable of having 15 minute circuit integrity

For more details information, please kindly contact with Fire testing centre with below information:

Tel: 0086-25-8658 3475

Website: www.firete.com

Email: info@firete.com

Attention: Julie Li

以上内容由中国防火网整理编辑，任何组织未经中国防火网授权,不得复制、转载、摘编或利用其它方式应用于任何商业行为。

 來源：防火網  發布時間：6/21/2011  點擊次數：4800