 主要阻燃防火認證標準 |
|
| 火車船舶汽車建材 |
|
|
 |
| |
|
 |
| |
首頁  常用标准 美国SwRI实验室测试标准/防火耐火检测 |
| |
美国SwRI实验室测试标准/防火耐火检测
|
美国SwRI实验室介绍
美国西南研究院（Southwest Research Institute, SwRI）成立于1947年，是一家独立的、非营利性质的、专门从事技术开发和转让的应用研究与开发机构，是美国同类企业中最大的企业之一，该企业根据合同为政府及全球的工业客户进行研究。Southwest Research Institute(SwRI) is a worldwide leader in fire research and testing for compliance with building codes, maritime codes and government specifications. 美国SwRI实验室在火灾研究及测试认证方面处于世界领先地位，符合建筑规范、IMO海事规范和政府规范。国内咨询电话：025-8658 3475。
南京睿督公司携手美国SwRI实验室提供如下美标防火耐火检测报告，测试标准如下：
10 CFR 50 Fire Tests of Penetration Seals, Protective Envelope and Flexible Barriers
10 CFR 71 Package and Transportation of Radioactive Material
16 CFR, Part 1633 Standard for the Flammability (Open Flame) of Mattress Sets
16 CFR, Section 1500.45 Determining Extremely Flammable Contents of Self-Pressurized Containers (Similar to ASTM D 3065)
ABD 0031 Fire-Smoke-Toxicity (FST) Test Specification (Airbus Industries)
AC11 Sect. 5.3.5 and Sect. 5.4.5 Comparative Bond Test
AC11 Sect. 5.4 Freeze/Thaw Test
AC24 Sections 6.7, 6.9, 6.10, 6.11 Exterior Insulation and Finish System
AC59 Direct-applies Exterior Finish System
AITM 2.0007 Determination of the Specific Optical Smoke Density of Aircraft Interior materials
AITM 3.0005 Determination of Specific Gas Components of Smoke Generated by Aircraft Interior Materials
ANI/MAERP Fire Tests of Protective Envelope Systems
API 16D Specification for control systems for drilling well control equipment and control systems for diverter equipment
API 607 Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
API 6F Specifications for Fire Test for valves
ASTM C1166 Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D1929 Ignition Properties of Plastics
ASTM D2015 Gross Calorific value of Coal and Coke by the Adiabatic Bomb Calorimeter
ASTM D2540 Drop-Weight Sensitivity of Liquid Monopropellants
ASTM D2859 Flammability of Finished Textile Floor Covering Materials
ASTM D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D3014 Flame Height, Time of Burning, Mass Loss of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D3065 Determining Extremely Flammable and Flammable Contents of Self-Pressurized Containers (Similar to 16 CFR, Section 1500.45)
ASTM D3675 ASTM Test for Surface Flammability of Materials Using a Radiant Energy Source
ASTM D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM D568 Flammability of Flexible Plastics
ASTM D635 Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position
ASTM E108 Fire Tests of Roof Coverings
ASTM E119 Fire Tests of Building Construction and Materials
ASTM E1232 Temperature Limit of Flammability of Chemicals
ASTM E1317 Flammability of Marine Surface Finishes
ASTM E1321 Determining Material Ignition and Flame Spread Properties
ASTM E1352 Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
ASTM E1353 Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E1354 Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Cone Calorimeter)
ASTM E136 Behavior of Materials in a Vertical Tube Furnace at 750°C (1382°F)
ASTM E1529 Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E1537 Fire Testing of Upholstered Furniture
ASTM E1590 Fire Testing of Mattresses
ASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1725 Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
ASTM E1740 Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1966 Fire-Resistive Joint Systems
ASTM E1995 Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E2010 Positive Pressure Fire Tests of Window Assemblies
ASTM E2074 Fire Tests of Door Assemblies
ASTM E2079 Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM E2307 Perimeter Joint Test
ASTM E487 Constant-Temperature Stability of Chemical Materials
ASTM E648 Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source [NIST (NBS) Flooring Radiant Panel]
ASTM E659 Standard Test Method for Autoignition Temperature of Liquid Chemicals
ASTM E662 Specific Optical Density of Smoke Generated by Solid Materials (Smoke Chamber)
ASTM E680 Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E681 Concentration Limits of Flammability of Chemicals
ASTM E695-97 Method for Measuring Relative Resistance of Wall, Floor, and Roof Constructions to Impact Loading
ASTM E771 Spontaneous Heating Tendency of Materials
ASTM E800 Gas Sampling Protocol
ASTM E814 Fire Tests of Through Penetrations (Seals)
ASTM E84 Surface Burning Characteristics of Building Materials
ASTM E918 Standard Practice for Determining Limits of Flammability at Elevated Temperature and Pressure
ASTM E970 Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source (Utilizes E 648 test apparatus-modified)
ASTM F1173 Fire and Hydrostatic Tests of Composite Pipe. Similar to IMO A.753(18)
ASTM F1387 Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F3059 Testing and performance requirements for fiber-reinforced polymer (FRP) gratings used in marine construction and shipbuilding to ensure personnel safety
ASTM G125 Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
ASTM G72 Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G74 Ignition Sensitivity of Materials to Gaseous Fluid Impact
Bellcore GR-63-CORE (NEBS) Network Equipment Building Services
BOEING BSS 7238 Smoke Test (Boeing)
BOEING BSS 7239 Toxicity Test (Boeing)
BOEING BSS 7304 Determination of Surface Flammability of Materials Using a Radiant Energy Source
BS 476 Part 20, 24 Equivalent or similar to ASTM E119
CA Technical Bulletin 106 Smoldering Cigarette Test for Mattress
CA Technical Bulletin 116 Cigarette Test of Upholstered Furniture
CA Technical Bulletin 117 Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture
CA Technical Bulletin 121 Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture
CA Technical Bulletin 129 Flammability Test for Mattresses for use in Public Buildings
CA Technical Bulletin 133 Flammability Test Procedure for Seating Furniture for Use in Public Occupancies
CA Technical Bulletin 603 Open-Flame Standard for Mattresses
CA Technical Bulletin 604 Bed Clothing Open-Flame Standard
CAL-19 California, State of, Title 19, Chapter 8, Articles 1-11
CAL-19 California, State of, Title 19, Chapter 2, 1237.1
California Building Code Chapter 7A; CA SFM 12-7A-1 Materials and Construction Methods for Exterior Wildfire Exposure: Exterior Wall Siding and Sheathing
California Building Code Chapter 7A; CA SFM 12-7A-2 Materials and Construction Methods for Exterior Wildfire Exposure: Exterior Windows
California Building Code Chapter 7A; CA SFM 12-7A-3 Materials and Construction Methods for Exterior Wildfire Exposure: Horizontal Projection Underside (Soffit)
California Building Code Chapter 7A; CA SFM 12-7A-4 Materials and Construction Methods for Exterior Wildfire Exposure: Decking
California Building Code Chapter 7A; CA SFM 12-7A-5 Materials and Construction Methods for Exterior Wildfire Exposure: Ignition Resistant Material
Can/ULC S102 (Canada) Canadian Safety Standard 102.2, Equivalent or similar to ASTM E84
CGA C14 Procedures for Fire Testing of DOT Cylinders Pressure Relief Device Systems
DOC-FF-1-170 Equivalent or similar to ASTM D 2859
DoD (Various) Safety and Performance Tests for Qualification of Explosives and Explosives Hazards Classification
DOT 49 CFR 393.67 Liquid Fuel Tanks
Drager Tubes Colorimetric Toxicity
ECE R100 Annex 8E Battery Electric Vehicle Safety
ECE R34 Annex 5, “Testing of Fuel Tanks Made of Plastic Material”
EN 13501-1 Fire Classification of Construction Products Using Reaction to Fire Tests
EN 13823 Reaction to fire tests for building products, excluding floorings, exposed to the thermal attack by a single burning item (SBI)
EN ISO 11925-2 Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test
EPA T0-15 Determination of Volatile Organic Compounds (VOCs) by GC-MS
FAR Part 23.853 Vertical Bunsen Burner Test for Passenger and Crew Compartment Interiors
Fire Block Test of Seats National Standards for School Buses and School Bus Operations
FM 4880 Flammability Apparatus, Room Corner Test, 25 ft and 50 ft Corner Test
FM 4910 Clean Room Tests
FM 4922 Flame/Smoke Exhaust Ducts
FM 4995 Commodity Classification of Idle Plastic Pallets
FM 6930 Flammability Classification of Industrial Fluids
FMCSA 49 CFR 393.67 (Federal Motor Carrier Safety Administration) Safety Venting Test Pressure Resistance Leakage Test Drop Test Fill Pipe Test
FMVSS 304 Compressed Natural Gas (CNG) Fuel Container Integrity
FTIR Toxic Gas Analysis
FTS 191 Various Test Methods:?
5903: Vertical 12- or 60-second Flame Test for Fabrics
5906: Horizontal 12- or 60-second Flame Test for Fabrics
5908: 45o Angle 12- or 60-second Flame Test for Fabrics
FTS 372 Equivalent or similar to ASTM E648
IEEE 1202 Flame Testing of Cables for Use in Cable Trays
IEEE 1717 Testing Circuit Integrity Cables using a Hydrocarbon Pool Fire Test Protocol
IEEE 1844 Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities
IEEE 383 Wire/Cable Vertical Flame Test
IEEE 634 Equivalent or similar to ASTM E814
IEC 60332-3-2 or EN 50266-2-1 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC 60332-3-23 or EN 50266-2-3 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC 60332-3-24 or EN 50266-2-4 Common tests methods for cables under fire conditions - test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures - Category C
MO A.653(18) Surface Flammability of Bulkhead, Ceiling, and Such Finish Materials
IMO A.753 (18) Guidelines for the Application of Plastic Pipes on Ships. Similar to ASTM F 1173
IMO FTP Code Part 1 Non-Combustibility Test
IMO FTP Code Part 2 Smoke and Toxicity Test
IMO FTP Code Part 3 (A.754(18)) Recommendation of Fire Resistance Tests for "A," "B," and "F" Class Divisions
IMO FTP Code Part 5 Test for Surface Flammability
IMO FTP Code Part 6 Test for Primary Deck
IMO FTP Code Part 7 Test for Vertically Supported Textiles and Films
IMO FTP Code Part 8 Test for Upholstered Furniture
IMO FTP Code Part 9 Test for Bedding Components
IMO Resolution MSC.40(64) Fire Restricting Materials (ISO 9705)
ISO 1182 Non-Combustibility of Materials
ISO 14692-2 Petroleum and Natural gas industries Glass-Reinforcer Plastics Piping
ISO 15029 Determination of spray ignition characteristics of fire-resistant fluids
ISO 15540 Ships and Marine Technology - Fire Resistance of Hose Assemblies
ISO 15541 Ships and Marine Technology - Fire Resistance of Hose Assemblies
ISO 1716 Heat of Combustion – Determination of the Calorific Value
ISO 20823 Determination of the flammability characteristics of fluids in contact with hot surfaces -- Manifold ignition test
ISO 22899-1 Determination of the resistance to jet fires or passive fire protection materials
ISO 5659 Part 2 Optical Density Test
ISO 5660 Rate of Heat Release from Building Products (Cone Calorimeter Method)
ISO 834 Fire Resistance Test
ISO 9239-1 Determination of Burning Behavior Using a Radiant Heat Source
ISO 9705 Room/Corner Test
MIL-STD-810, Method 511 Explosive Atmosphere
MIL-T-24708(SH) Quarter-Scale Tests
NES 711 Determination of Smoke Index of the Products of Combustion from Small Specimens of Materials
NES 713 Bunsen Burner Flame Test with Draeger Tube Toxicity Determinations
NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems: This standard specifies fire protection and life safety requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems.
NFPA 251 Equivalent or similar to ASTM E119
NFPA 252 Equivalent or similar to ASTM E152
NFPA 253 Equivalent or similar to ASTM E648
NFPA 255 Equivalent or similar to ASTM E84
NFPA 256 Equivalent or similar to ASTM E108
NFPA 258 Equivalent or similar to ASTM E662
NFPA 259 Potential Heat of Building Materials
NFPA 260 Cigarette Ignition Resistance of Components of Upholstered Furniture
NFPA 261 Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes
NFPA 265 Equivalent or similar to UBC 8-2
NFPA 266 Test of Upholstered Furniture Exposed to Flaming Ignition Source
NFPA 267 Test of Mattresses and Bedding Assemblies Exposed to Flaming Ignition Source
NFPA 268 Radiant Panel Test Exterior Wall Systems
NFPA 271 Equivalent or similar to ASTM E1354
NFPA 275 Thermal Barrier Test, Similar to UBC 26-2
NFPA 285 Method of Test for the Evaluation of Flammability Characteristics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Components Using the Intermediate-Scale, Multistory Test Apparatus (ISMA)
NFPA 286 Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
NFPA 290 Jet Fire
NFPA 30/30A Flammable and Combustible Liquids Code
NFPA 37 Standard for the installation and use of stationary combustion engines and gas turbines
NFPA 415 Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
NFPA 417 Fire Tests of Aircraft Loading Walkways
NFPA 58 Storage and Handling of Liquefied Petroleum Gases. Equivalent or similar to 49 CFR Section 179.105-4 and 179-105-7
NFPA 701/UL 214 Test 1/Test 2 Fire Tests for Flame-Resistant Textiles and Films: Large Scale and Small Scale
OTI 95/634 Jet Fire Test
SAE J1527 Marine Fuel Hose Fire Resistance Tests
SAE J1942 Hose and Hose Assemblies for Marine Applications
SAE J2464 Electric and Hybrid Electric Rechargeable Energy Storage System (RESS) Safety and Abuse Testing
SBI - EN 13823 European Single Burning Item Test
School Bus Seat School Bus Seat Upholstered Fire Block Test
SMP 800-C Bombardier Toxicity Test
STD791C, Method 6052.1 High Temperature-High Pressure Spray Ignition Test
STD791C, Method 6053.1 Manifold Ignition Test
SwRI 00-01 Fire Performance Evaluation of Fondue Pot Burners
SwRI 91-01 Small Scale Fire Test for Paper, Corrugated Board, and Thin Materials
SwRI 93-01 Fire, Hose Steam, Impact, Ballistic and Leakage Tests
SwRI 95-03 Testing Requirements for Multi-Hazard Aboveground Flammable Liquid/Fuel Storage Tanks
SwRI 97-02 Hydraulic Test of Automobile Fuel Tank
SwRI 99-01 Testing Requirements for Liquid Hydrocarbon Pool-Fire Testing of Aboveground Flammable Liquid/Fuel Storage Tanks (AST) and Liquid Petroleum Gas (LPG) Storage Tanks Containing Fuel
UBC 17-3 See New Common Code UBC 26-2
UBC 17-5 See New Common Code UBC 26-3
UBC 17-6 See New Common Code UBC 26-4
UBC 26-2 Evaluation of Thermal Barriers (Formerly UBC 17-3)
UBC 26-3 Room Fire Test for Interior of Foam Plastic Systems (formerly UBC 17-5)
UBC 26-6 Ignition Properties of Plastics
UBC 26-7 Method of Test for Determining Classification of Approved Light-Transmitting Plastics
UBC 26-9 Method of Test for the Evaluation of Flammability Characteristics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Components Using the Intermediate-Scale, Multistory Test Apparatus (ISMA)
UBC 42-1 See New Common Code UBC 8-1
UBC 42-2 See New Common Code UBC 8-2
UBC 43-6 See New Common Code UBC 7-5
UBC 7-2 Fire Tests of Door Assemblies
UBC 7-5 Fire Tests of Through-Penetration Fire Stops (formerly UBC 43-6)
UBC 8-1 Surface Burning Characteristics of Building Materials. Equivalent or similar to ASTM E84 (Formerly UBC 42-1)
UBC 8-2 Evaluating Room Fire Growth Contribution of Textile Wallcovering (Formerly UBC 42-2)
UFC 79-7 Aboveground Storage Tanks
UL 10A and 10B Equivalent or similar to ASTM E152
UL 1479 Equivalent or similar to ASTM E814
UL 155 Equivalent or similar to ASTM E152
UL 162 Standard for Foam Equipment and Liquid Concentrates
UL 1684 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
UL 1685 Vertical Tray or FT4 CL2
UL 1685 Fire Tests for Data Cables
UL 1709 Standard for Rapid Rise Fire Tests if Protection Materials for Structural Steel Equivalent or similar to UK-DOE Fire Curve, Mobil Fire Curve, and NPD Fire Curve
UL 1715 Fire Test of Interior Finish Material
UL 1975 Fire Test of Foamed Plastics Used for Decorative Purposes
UL 199 Automatic Sprinklers for Fire-Protection Service
UL 2024 Standard for Test Method for Flame and Smoke Characteristics of Nonmetallic Raceway Used in Environmental Air-Handling Spaces
UL 2043 Fire Test for Heat and Visible Smoke Release for Discrete Product and their Accessories Installed in Air-Handling Spaces
UL 2080 Fire Resistant Tanks for Flammable and Combustible Liquids
UL 2085 Fire, Hose Stream, Impact, Ballistic and Leakage Tests. Equivalent or similar to UFC Appendix II-F, 79-7
UL 2218 Impact Resistance Test of Prepared Roofing
UL 2335 Fire Tests of Storage Pallets
UL 555 Fire Dampers and Ceiling Dampers
UL 711 Standard for Rating and Fire Testing of Fire Extinguishers
UL 72 Tests for Fire Resistance of Record Protection Equipment
UL 723 Equivalent or similar to ASTM E84
UL 790 Equivalent or similar to ASTM E108
UL 9 Equivalent or similar to ASTM E163
UL 94 Standard Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UN Practices & Procedures Various HazMat Classification Procedures, Test Methods and Criteria, Transport of Dangerous Goods
南京睿督公司专业从事轨道车辆材料十多年，在防火耐火测试认证领域拥有丰富的经验，具体测试内容，请咨询南京睿督公司
南京睿督公司免费咨询电话：025-86583475 400-603-6575
网址：www.fire-test.com www.fire-test.cn
邮箱：info@fire-test.com
…
|
來源：防火網 發布時間：12/6/2021 點擊次數：552
上一條:
GB/T 16810-2006保险柜耐火性能要求和试验方法
下一條:
南京睿督免费分享TB/T3139-2021最新标准 |
| |
|
 |
|
蘇公網安備 32010502010088號
測試服務：
