ASTM F1333消防和泡沫灭火站操纵室结构

ASTM F1333 Standard Specification for Construction of Fire and Foam Station Cabinets
ASTM F1333 消防和泡沫灭火站操纵室结构

This specification provides design and construction criteria for double and single fire and foam station cabinets. These cabinets are classified as Type I (single cabinet) and Type II (double cabinets). Type I cabinets are further subdivided into two grades: Grade 1 which has a right-hand door and Grade 2 with a left-hand door. Each of these grades has three classes according to material: Class A is made of mild steel, Class B with stainless steel, and Class C with aluminium. On the other hand, Type II cabinets have only one grade, Grade 1 with right-hand door active leaf. This grade is further classified into three classes: Class A, Class B, and Class C. The parts of these cabinets shall include: frame, hinge pad, hinge, brace, door, staple, hook, latch, keeper, rivet, clip, snubber, retainer, saddle, strap, clip, washer, back, leg, bolt, and back bar. Fire and foam cabinets shall be free of weld spatter, burrs, and sharp corners, rough edges, and other defects which might be hazardous to personnel and equipment.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope
1.1 This specification provides design and construction criteria for double and single fire and foam station cabinets. See Fig. 1 and Fig. 2. Valves, hose, and fittings are not included.
1.2 Optional back and legs may be provided.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM A36/A36M Specification for Carbon Structural Steel
ASTM A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A167 Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
ASTM A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A569/A569M Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial
ASTM B209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B221 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM F593 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM F594 Specification for Stainless Steel Nuts
ASTM F783 Specification for Staple, Handgrab, Handle, and Stirrup Rung
American National Standards
ANSIB18.22.1 Plain Washer
Other Standards
AmericanWeldingSocie Structural Welding Code
Index Terms
fire; foam; foam station cabinet; marine technology; ships; Aluminum--specifications; Cabinets; Fire fighting systems--marine applications; Foam station cabinets; Shipboard fire management; Shipbuilding steel materials--specifications; Station cabinets;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 来源：防火网  发布时间：12/2/2013  点击次数：1474