ASTM C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) ASTM C1071 纤维玻璃管道衬里绝缘材料(隔热和吸音材料)标准规范 This specification covers fibrous glass insulation used as a thermal and sound absorbing liner for interior surfaces of ducts, plenums, and other air handling equipment. The insulation shall be of the following types: Type I and Type II. The basic material shall be made from glass processed from the molten state into fibrous form with a binder added to form dimensionally stable insulation. The following test methods shall be performed: corrosiveness; water vapor sorption; fungi resistance; temperature resistance; erosion resistance; odor emission; surface burning characteristics; apparent thermal conductivity; sound absorption coefficients; bacteria resistance; and combustion characteristics. This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope 1.1 This specification covers fibrous glass insulation used as a thermal and sound absorbing liner for interior surfaces of ducts, plenums, and other air handling equipment that handle air up to 250°F (121°C). 1.2 The values stated in inch-pound units are the standard. The SI values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) ASTM Standards ASTM C167 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations ASTM C168 Terminology Relating to Thermal Insulation ASTM C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus ASTM C390 Practice for Sampling and Acceptance of Thermal Insulation Lots ASTM C411 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation ASTM C423 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method ASTM C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus ASTM C665 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing ASTM C1104/C1104M Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation ASTM C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus ASTM C1304 Test Method for Assessing the Odor Emission of Thermal Insulation Materials ASTM C1338 Test Method for Determining Fungi Resistance of Insulation Materials and Facings ASTM E84 Test Method for Surface Burning Characteristics of Building Materials ASTM E795 Practices for Mounting Test Specimens During Sound Absorption Tests ASTM E2231 Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics ASTM G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi ASTM G22 Practice for Determining Resistance of Plastics to Bacteria Other Standards CAN/ULC-S102Methodof Index Terms duct; duct lining; fibrous glass; plenum; sound absorbing insulation; thermal insulation; Acoustical materials/applications--specifications; Air analysis; Airflow performance; Ducts/duct liners; Fire-resistant materials/testing--specifications; Flexural testing--masonry units; Plenums; Thermal insulating materials--specifications; Thermal materials (lining);
更多防火阻燃测试认证,请咨询中国防火网 电话:400-666-7290 网址:www.firete.com 邮箱:info@firete.com
...
|