ASTM F1990漏油现场燃烧指南:点火装置

ASTM F1990 Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
ASTM F1990 漏油现场燃烧指南：点火装置

This guide describes the requirements for igniting oil for the purpose of in-situ burning. It is intended to aid decision-makers and spill-responders in contingency planning, spill response, and training, and to aid manufacturers in developing effective ignition devices.
This guide describes criteria for the design and selection of ignition devices for in-situ burning applications.
This guide is not intended as a detailed operational manual for the ignition and burning of spilled oil.

1. Scope
1.1 This guide relates to the use of in-situ burning of spilled oil. The focus of the guide is in-situ burning of oil on water, but the ignition techniques and devices described in the guide are generally applicable to in-situ burning of oil spilled on land as well.
1.2 The purpose of this guide is to provide information that will enable oil-spill responders to select the appropriate techniques and devices to successfully ignite oil spilled on water.
1.3 This guide is one of four related to in-situ burning of oil spills. Guide F 1788 addresses environmental and operational considerations. Guide F 2152 addresses fire-resistant booms, and Guide F 2230 addresses burning in ice conditions.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. In particular, the storage, transport, and use of ignition devices may be subject to regulations that will vary according to the jurisdiction. While guidance of a general nature is provided herein, users of this guide should determine regulations that apply to their situation.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D975 Specification for Diesel Fuel Oils
ASTM F1788 Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM F2152 Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
ASTM F2230 Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
Index Terms
ignition; in-situ burning; oil-spill burning; oil-spill disposal;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网  发布时间：12/5/2013  点击次数：1242