ASTM G189标准名称实验室模拟绝缘腐蚀状态的标准指南

ASTM G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G189 标准名称实验室模拟绝缘腐蚀状态的标准指南

1. Scope
1.1 This guide covers the simulation of corrosion under insulation (CUI), including both general and localized attack, on insulated specimens cut from pipe sections exposed to a corrosive environment usually at elevated temperature. It describes a CUI exposure apparatus (hereinafter referred to as a CUI-Cell), preparation of specimens, simulation procedures for isothermal or cyclic temperature, or both, and wet/dry conditions, which are parameters that need to be monitored during the simulation and the classification of simulation type.
1.2 The application of this guide is broad and can incorporate a range of materials, environments and conditions that are beyond the scope of a single test method. The apparatus and procedures contained herein are principally directed at establishing acceptable procedures for CUI simulation for the purposes of evaluating the corrosivity of CUI environments on carbon and low alloy pipe steels, and may possibly be applicable to other materials as well. However, the same or similar procedures can also be utilized for the evaluation of (1) CUI on other metals or alloys, (2) anti-corrosive treatments on metal surfaces, and (3) the potential contribution of thermal insulation and its constituents on CUI. The only requirements are that they can be machined, formed or incorporated into the CUI-Cell pipe configuration as described herein.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM A106/A106M Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM C552 Specification for Cellular Glass Thermal Insulation
ASTM C871 Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
ASTM D1193 Specification for Reagent Water
ASTM G1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
ASTM G3 Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G5 Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G15 Terminology Relating to Corrosion and Corrosion Testing
ASTM G31 Practice for Laboratory Immersion Corrosion Testing of Metals
ASTM G46 Guide for Examination and Evaluation of Pitting Corrosion
ASTM G59 Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G102 Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
Index Terms
corrosion under insulation; CUI; electrochemistry; mass loss; polarization resistance; protection efficiency; thermal insulation;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网  发布时间：12/5/2013  点击次数：1534