ASTM E2323用氧气分析仪测量法计算密封绝缘玻璃装置中的填充气体的浓度的标准试验方法

ASTM E2323 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
ASTM E2323用氧气分析仪测量法计算密封绝缘玻璃装置中的填充气体的浓度的标准试验方法

1. Scope
1.1 This test method covers procedures for the use of oxygen analyzers to measure the percentage of oxygen in an insulating glass unit where normal atmospheric air has been replaced with other gases such as argon, krypton, xenon, or sulfur hexafluoride (SF6). The procedure shows how to convert the measured percentage of oxygen in an insulating glass unit to the percentage of air in the unit, and subtracts the air percentage from 100 % to calculate the percentage of fill gas in the unit.
1.2 This test method does not determine the type of fill gas. It only measures the percentage of oxygen in the gas in the space between the lites of an insulating glass unit.
1.3 This test method is not applicable to insulating glass units containing open capillary/breather tubes.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately
ASTM Standards
ASTM C162 Terminology of Glass Products
ASTM C717 Terminology of Building Seals and Sealants
ASTM E631 Terminology of Building Constructions
Index Terms
fill gas; gas concentration; oxygen; oxygen analyzer; sealed insulating glass unit;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网  发布时间：11/18/2013  点击次数：1703