|
IMO FTPC Part 5:表面可燃性测试
IMO FTPC Part 5: Test for surface flammability
Field of application：
Surface materials for bulkheads and ceilings and similar exposed surfaces, floor coverings舱壁、天花板和甲板表面
等级评估:
|
Bulkhead, wall and ceiling linings
|
Floor coverings
|
|
CFE Qsb Qt Qp
Kw/m2 MJ/m2 MJ kW
|
CFE Qsb Qt Qp
Kw/m2 MJ/m2 MJ kW
|
|
≥20 ≥1.5 ≤0.7 ≤4.0
|
≥7.0 ≥0.25 ≤2.0 ≤10.0
|
Where CFE: Critical flux at extinguishment 熄灭时临界热辐射量
Qsb: Heat for sustained burning 持续燃烧热值
Qt: Total heat release 热释放总值
Qp: Peak heat release rate 热释放峰值
The test is terminated when any one of the following is applicable;
1.The specimen fails to ignite after a 10 minute exposure
2.Three minutes have pass since all flaming from the specimen ceased.
3.Flaming reaches the end of the specimen or self extinguishes and thus ceases to progress along the specimen. This criterion is only used when heat release measurements are not being made.
4.In the case of floorcoverings, the test shall be terminated after 40 minutes.
IMO MSC 61(67) FTPC – 相关测试标准
IMO FTPC Part 1: Non-combustibility test 不燃物测试
IMO FTPC Part 2: Smoke and toxicity test 烟雾毒性测试
IMO FTPC Part 4: Test for fire door control systems 防火门控制系统测试
IMO FTPC Part 5: Test for surface flammability 表面燃烧试验
IMO FTPC Part 6: Test for primary deck coverings 主要甲板覆盖物测试
IMO FTPC Part 7: Test for vertically supported textiles and films 垂直放置的纺织物料和覆膜测试
IMO FTPC Part 8: Test for upholstered furniture 软垫家具测试
IMO FTPC Part 9: Test for bedding components 床上用品测试
ISO 9705 and ISO 5660: Test for fire-restricting materials for high-speed craft 高速船舶防火材料
您可关注我司公众号：“firetest”各种标准解读及行业最新资讯可供参考，手机阅读更方便！
更多关于IMO FTPC Part 5表面可燃性测试，请咨询南京睿督公司
南京睿督公司咨询电话：025-8658 3475 400-603-6575
网址：www.fire-test.com
邮箱：info@fire-test.com
……
|
苏公网安备 32010502010088号
测试服务：
主要阻燃防火认证标准
