ASTM D5086用火焰原子吸收分光光度法测定大气作用下湿沉积物中钙,镁,钾和钠含量的标准试验方法

ASTM D5086 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D5086用火焰原子吸收分光光度法测定大气作用下湿沉积物中钙,镁,钾和钠含量的标准试验方法

This test method may be used for the determination of calcium, magnesium, potassium, and sodium in atmospheric wet deposition samples.

Emphasis is placed on the easily contaminated quality of atmospheric wet deposition samples due to the low concentration levels of dissolved metals commonly present.

Annex A1 represents cumulative frequency percentile concentration plots of calcium, magnesium, potassium, and sodium obtained from analyses of over five thousand wet deposition samples. These data may be used as an aid in the selection of appropriate calibration standard concentrations. (3)

1. Scope
1.1 This test method is applicable to the determination of calcium, magnesium, potassium, and sodium in atmospheric wet deposition (rain, snow, sleet, and hail) by flame atomic absorption spectrophotometry (FAAS). (1)

1.2 The concentration ranges are listed below. The range tested was confirmed using the interlaboratory collaborative test (see Table 1 for a statistical summary of the collaborative test).
 
1.3 The method detection limit (MDL) is based on single operator precision (2) and may be higher or lower for other operators and laboratories. Many workers have found that this test method is reliable at lower levels than were tested, but the precision and bias data presented are insufficient to justify their use at lower levels.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 8.3, 8.7, 12.1.8, and Section 9.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D883 Terminology Relating to Plastics
ASTM D1129 Terminology Relating to Water
ASTM D1193 Specification for Reagent Water
ASTM D1356 Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D2777 Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D4453 Practice for Handling of Ultra-Pure Water Samples
ASTM D4691 Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
ASTM D5012 Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM E131 Terminology Relating to Molecular Spectroscopy
ASTM E275 Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E694 Specification for Laboratory Glass Volumetric Apparatus

Index Terms
atmospheric wet deposition; atomic absorption; calcium; magnesium; potassium; precipitation; sodium; Atmospheric wet deposition (AWD); Beer's law; Calcium content--atmospheric analysis; Contamination--atmospheric; FAAS (flame atomic absorption spectrometry); Hail; Magnesium content--atmospheric analysis; Method detection limit (MDL); Potassium content--atmospheric analysis; Rain; Sleet; Snow; Sodium content--atmospheric analysis; Spectrophotometry--atomic absorption;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网　发布时间：11/5/2013 点击次数：1471